Cable Luber Tool

$19.95
INSTORE & ONLINE

Compliment your order with the below


Superfast dispatch tick
trusted australian business tick

CABLE LUBER

 

Item Description:

  • Clamps over cable and housing
  • Use with aerosol cable lube
  • Allows easy and mess free injection of lube through entire cable housing
  • Twin set screws giving the cable tightest seal possible when lubricating

 

Instructions:

This is a nice little tool to pressure lube your cables on your bike for smooth operation and longer life. Use your favorite cable lube aerosol can with the little straw the can comes with.
The tool clamps to the cable and the lube is forced in and the cable is lubed quick and easy. See photos below of one in use,
Great to removedirt, grime,water and moisturefrom cables.

Fits 3/16"- 3/8" OD cable diameters , these are the sizes on most bikes.

  
1. Unscrew the clamp Lay the inner cable into the clamp
2. Then push the outer cable into the hole and tighten up the clamp
3. Attach the tube from the aerosol lubrication to the small hole on the side and spray required amount

 

(CO2)

SKU CO2
Brand MCS
Shipping Weight 0.0400kg
Shipping Width 0.040m
Shipping Height 0.020m
Shipping Length 0.050m
Shipping Cubic 0.000040000m3
Unit Of Measure ea

You May Also Like



More From This Category